DXT2011P5 document number: ds32069 rev. 3 - 2 1 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated 100v npn low sat medium power transistor powerdi ? 5 features ? 43% smaller than sot223; 60% smaller than to252 ? maximum height just 1.1mm ? rated up to 3.2w ? bv ceo > 100v ? maximum continuous current i c = 6a ? low saturation voltage ? totally lead-free & fully rohs compliant (note 1) ? halogen and antimony free. ?green? device (note 2) applications ? motor drive ? regulator circuit mechanical data ? case: powerdi5 ? case material: molded plasti c, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? matte tin annealed over copper leadframe. solderable per mil-std-202, method 208 ? weight: 0.093 grams (approximate) ordering information (note 3) part number case packaging DXT2011P5-13 powerdi5 5000/tape & reel notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. halogen and antimony free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm to tal br + cl) and <1000ppm antimony compounds. 3. for packaging details, go to our website at http://www.diodes.com. marking information top view bottom view pin-out diagram device schematic dxt2011 = product type marking code = manufacturers? code marking k = factory designator yyww = date code marking yy = last two digits of year (ex: 09 for 2009) ww = week code (01 to 53) powerdi5 yywwk dxt2011
DXT2011P5 document number: ds32069 rev. 3 - 2 2 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated maximum ratings @t a = 25c unless otherwise specified characteristic symbol value unit collector-base voltage v cbo 200 v collector-emitter voltage v ceo 100 v emitter-base voltage v ebo 7 v continuous collector current i c 6 a peak pulse current i cm 10 a thermal characteristics @t a = 25c unless otherwise specified characteristic symbol value unit power dissipation (note 4) p d 3.2 w (note 5) 1.7 (note 6) 0.74 thermal resistance, junction to ambient (note 4) r ja 39 c/w (note 5) 75 (note 6) 169 thermal resistance, junction to collector terminal r jt 5.6 c/w operating and storage temperature range t j , t stg -55 to +150 c notes: 4. device mounted on fr-4 pcb, single sided 2 oz. copper, collector pad dimensions 50mm x 50mm. 5. device mounted on fr-4 pcb, single sided 1 oz. copper, collector pad dimensions 25mm x 25mm. 6. device mounted on fr-4 pcb, single sided 1 oz. copper, minimum recommended pad layout.
DXT2011P5 document number: ds32069 rev. 3 - 2 3 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated thermal characteristics 10 100 1000 10000 20 40 60 80 100 120 140 160 180 10 100 1000 10000 0 1 2 3 4 100m 1 10 100 10m 100m 1 10 single pulse. t amb =25c 50mmx50mm fr4 2oz cu v ce(sat) limited 100s 1ms 10ms 100ms 1s dc safe operating area i c collector current (a) v ce collector-emitter voltage (v) 0 25 50 75 100 125 150 175 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 minimum pad 1oz cu 25mmx25mm fr4 1oz cu 50mmx50mm fr4 2oz cu derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 power rating vs. cu area thermal resistance vs. cu area 50mmx50mm fr4 2oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c 50mmx50mm fr4 2oz cu pulse power dissipation pulse width (s) max power dissipation (w) 2 oz. weight copper t (amb) =25c copper area (sq mm) thermal resistance (c/w) 1 oz. weight copper 1 oz. weight copper 2 oz. weight copper power rating (w) copper area (sq mm) t (amb) =25c
DXT2011P5 document number: ds32069 rev. 3 - 2 4 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo 200 235 ? v i c = 100 a collector-emitter breakdown voltage (note 7) bv ceo 100 115 ? v i c = 10ma emitter-base breakdown voltage bv ebo 7 8.1 ? v i e = 100 a collector cutoff current i cbo ? ? ? ? 20 0.5 na a v cb = 150v v cb = 150v, t amb = 100 c collector cutoff current i cer r1k ? ? ? ? ? 20 0.5 na a v cb = 150v v cb = 150v, t amb = 100 c emitter cutoff current i ebo ? ? 10 na v eb = 6v collector-emitter saturation voltage (note 7) v ce(sat) ? ? ? ? 21 50 95 180 35 65 125 220 mv i c = 0.1a, i b =-5ma i c = 1a, i b = 100ma i c = 2a, i b = 100ma i c = 5a, i b = 500ma base-emitter saturation voltage (note 7) v be ( sat ) ? 1020 1120 mv i c = 5a, i b = 500ma base-emitter turn-on voltage (note 7) v be ( on ) ? 920 1000 mv v ce = 2v, i c = 5a dc current gain (note 7) h fe 100 100 30 10 ? ? ? ? ? 300 ? ? ? v ce = 2v, i c = 10ma v ce = 2v, i c = 2a v ce = 2v, i c = 5a v ce = 2v, i c = 10a transition frequency f t ? 130 ? mhz v ce = 10v, i c = 100ma, f = 50mhz output capacitance c obo ? 26 ? pf v cb = 10v, f = 1mhz switching times t on t off ? ? 41 1010 ? ? ns v cc = 10v, i c = 1a, i b1 = i b2 = 100ma notes: 7. pulse test: pulse width 300 s. duty cycle 2.0%.
DXT2011P5 document number: ds32069 rev. 3 - 2 5 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated typical characteristic 1m 10m 100m 1 10 10m 100m 1 1m 10m 100m 1 10 0.0 0.1 0.2 0.3 0.4 0.5 0.6 1m 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1.4 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 250 v ce(sat) v i c tamb= 25c i c /i b = 50 i c /i b = 20 i c /i b = 10 v ce(sat) (v) i c collector current (a) v be(sat) v i c i c /i b = 10 100c 25c -55c v ce(sat) (v) i c co llecto r cu r r en t (a) h fe v i c v ce = 2v -55c 25c 100c normalised gain i c co llecto r cu r r en t (a) 25c v ce(sat) v i c i c /i b = 10 100c -55c v be(sat) (v) i c co llecto r cu r r en t (a) v be(on) v i c v ce = 2v 100c 25c -55c v be(on) (v) i c collector current (a) typical gain (h fe )
DXT2011P5 document number: ds32069 rev. 3 - 2 6 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated package outline dimensions suggested pad layout powerdi5 dim min max a 1.05 1.15 a2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 d 3.90 4.05 d2 3.054 typ e 6.40 6.60 e 1.84 typ e1 5.30 5.45 e2 3.549 typ l 0.75 0.95 l1 0.50 0.65 w 1.10 1.41 all dimensions in mm dimensions value (in mm) c 1.840 g 0.852 x 3.360 x1 1.390 y 4.860 y1 1.400 e e1 b1 a a2 a2 d b2 b1 e d2 l e2 l1 w g x c y1 (2x) y x1 (2x)
DXT2011P5 document number: ds32069 rev. 3 - 2 7 of 7 www.diodes.com april 2012 ? diodes incorporated DXT2011P5 powerdi is a re g istered trademark of diodes incor p orated. advance information a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described he rein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
